Resetting A Watchman Instructions

 

           1. Switch the Watchman on and off. You will see a serial                    number followed  by a lower case R (stands for Reset)

 

           2. Unscrew and remove the power tube wait for 2 minutes and            then screw the power tube back on.

           This should reboot the system

 

           3. Within a few minutes the Watchman should display the level            of oil in your tank.

 

What the Signs Mean:

F = FULL

Red Light Flashing - No Signal

Red Flashing Light - Tank Is Low on Fuel

Fluid level low together with “BAT LOW” - New Power Tube Needed

C Means connection fault replacement needed.

 

To Change the battery

1. Switch off Watchman display.

2. Unscrew your existing copper tube battery from the transmitter.

3. Pause for 5 Minutes.

4. Switch the Watchman display back on.

5. Fit the new copper tube battery.

 

 

Westcountry Tank Replacements